Matrox GevIQ

Overview Efficient high-bandwidth GigE Vision acquisition Matrox® GevIQ is the industry’s first network interface card (NIC) offering generic GigE Vision® acquisition offload at speeds up to 25 Gigabits/s per port. With GigE Vision packet...

Radient eCL Frame Grabber, RAD2GQB150400*, DEMO SALE

Matrox Radient eCL-QB quad-Base Camera Link® frame grabber with 2 GB DDR2-667 SDRAM, Altera® Stratix® III EP3SL150-C4 processing FPGA and no SRAM.   The Matrox Radient eCL frame grabber matches the highest level of performance offered...

Morphis frame grabber MOR/4VD*, Legacy Product

Standard analog color/monochrome PCI-X frame grabber with four video decoders. Video input through BNC connectors. Analog composite (CVBS) or Y/C NTSC/PAL analog RS-170/CCIR DATA SHEET

Solios eA/XA frame grabber, SOL 6M 1 A*, DEMO SALE

Only 1 available. Retired model.  Used items may have been tested in our lab or served as a customer demonstration/evaluation. It is an open box item, sold "As Is". Analog PCI-X® frame grabber with single input, 64 MB DDR SDRAM...

Rapixo CL Pro Frame Grabber

Build upon the design of Matrox Radient eV Series, this product offers reliable image acquisition, extended cable length support, high frame-rate image capture, and onboard image processing offload that will extend the effectiveness of the Camera Link...

Helios eCL/XCL HEL2MSFCL*

Single-FULL Camera Link® PCI-X frame grabber with 256 MB DDR SDRAM and cable adaptor board.   Discontinued item. New unopened.   Matrox part #HEL2MSFCL*   DATA SHEET 

Helios eCL/XCL HEL2MDBCLE*

Dual-BASE Camera Link® PCIe x4 frame grabber with 256 MB DDR SDRAM and cable adaptor board.     Discontinued item. New unopened. Matrox part #HEL2M DBCLE*  DATA SHEET 

Concord PoE with ToE

Matrox® Concord PoE is a new generation of Gigabit Ethernet adaptors for interfacing one or more GigE Vision® cameras supporting Power-over-Ethernet (PoE). Available with two or four Gigabit Ethernet ports, these network interface cards (NICs)...

Rapixo CXP Frame Grabber

Single- to quad-input CoaXPress 2.0 frame grabbers with optional data forwarding and FPGA-based image processing offload. Models available: RAP 1G 1C12: Matrox Rapixo CXP Single CXP-12 PCIe 2.1 x4 frame grabber with 1 GB DDR3 SDRAM and passive heatsink...

Single-FULL Camera Link® PCI-X frame grabber

Single-FULL Camera Link® PCI-X frame grabber with 256 MB DDR SDRAM and cable adaptor board.  Open Box Matrox part #HEL2MSFCL* 

Helios eCL/XCL HEL1MDBCL

Dual-BASE Camera Link® PCI-X frame grabber with 128 MB DDR SDRAM and cable adaptor board.  Discontinued item. New unopened. Matrox part #HEL1M DBCL  DATA SHEET 

PIXCI D3XE frame grabber

PIXCI® D3XE (LVDS (RS-644) PCI Express x1 Frame Grabber) This series of 24+ custom-configured imaging boards are optimized to support 24+ specialized digital cameras. Features: PCIe x1 frame grabber for LVDS parallel output digital...

PIXCI D3X frame grabber

The PIXCI D3X is a PCI-compatible imaging board supporting camera configurations with 3 to 8 data channels, or with 30 to 64 total data bits - cameras that are beyond the interfacing capacity of the PIXCI D2X. ONE PIXCI D3X BOARD ON ONE BUS...

PIXCI e104x4 camera link frame grabber

Applications for this frame grabber include:  Airborne, automotiv, high data rate, industrial, mobile, multi-camera, rugged and underwater. Frame Grabber Features PCIe/104 x4 Gen2 Camera Link Frame Grabber Captures from 1 or 2 Medium, Full, or...

PIXCI ECB2 dual base camera link frame grabber

The PIXCI® ECB2 frame grabber provides two interfaces for any two Base camera link cameras. The PIXCI ECB2 is handled by EPIX' software as if two PIXCI ECB1 boards are installed. The ECB2 will accept two trigger signals one for each camera;...