The Toshiba-Teli BG040M/MG Series is an integrated CMOS camera with a Gigabit Ethernet interface.
For video output and camera control, the Gigabit Ethernet interface standard "IEEE802.3ab" is adopted for high transfer rate, and it is easy to integrate into industrial equipment. Available with (BU040MG) or without optical glass (BU040M)
Key Features
- High frame rate
- Gigabit Ethernet interface (Power over Ethernet)
- GigE Vision Ver.1.2 conformity
- GenICam Ver.2.4 / Ver.3.0 conformity
- IIDC2 Ver.1.1.0 conformity
- Scalable
- Color processing (BG040MCG / BG040MCF)
- All pixel data readout
- Global shutter
- Square grid arrangement
- Random Trigger Shutter
| Model | BG040M |
|---|---|
| Interface | Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity |
| Pixels | 0.4M |
| Imager | CMOS image sensor |
| Imager model | IMX287LLR |
| Resolution | 720(H) x 540(V) |
| Frame rate | 291fps (Mono 8bit) |
| Pixel size | 6.9μm x 6.9μm |
| Scanning area | 4.97mm(H) x 3.73mm(V) |
| Image size | 1/2.9 type |
| Aspect ratio | 4:3 |
| Scanning | Progressive |
| Electronic shutter method | Global shutter |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entries (max) |
| Exposure Time | MANUAL : 1.08μs to 13.31μs (Short exposure mode ON), 20μs to 16s (Short exposure mode OFF) AE : 20μs to 1s Random Trigger Shutter : 20μs to 16s (Edge or Bulk mode), 200μs to Trigger width (Level mode) |
| Synchronization System | Internal |
| Optical glass/filter | - |
| Sensitivity | 1,890 lx (F5.6, 1/333s) |
| Minimum illuminance | 1 lx (F1.4, Gain: +36dB, Video level: 50%) |
| Gain | MANUAL : 0 to +36dB, AGC : 0 to +24dB |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit |
| Image Buffer | 64M Byte |
| Image Output Format | Mono 8bit / Mono 10bit / Mono 12bit |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip |
| External trigger input | Low: 0 to 0.5V, High: 3.3 to 24.0V High active / Low active, Pulse width: 200μs (minimum) |
| Power supply | PoE / DC12V±10% |
| Power consumption | PoE: 3.3W max. / DC12V: 2.7W max. |
| Lens mount | C-mount |
| External dimension | 29(W) x 29(H) x 40(D) mm (Not including protruding parts) |
| Mass | approx. 59g |
| Operation temperature | 0°C to 40°C (below 60°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2 |
