The BG505LM Series is an integrated CMOS camera with a Gigabit Ethernet interface.
For video output and camera control, the Gigabit Ethernet interface standard "IEEE802.3ab" is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
Key Features
- High frame rate
- Gigabit Ethernet interface (Power over Ethernet)
- GigE Vision Ver.1.2 conformity
- GenICam Ver.2.4 / Ver.3.0 conformity
- IIDC2 Ver.1.1.0 conformity
- Scalable
- All pixel data readout
- Global shutter
- Square grid arrangement
- Random Trigger Shutter
| Model | BG505LMG |
|---|---|
| Interface | Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity |
| Pixels | 5M |
| Imager | CMOS image sensor |
| Imager model | IMX264LLR |
| Resolution | 2,448(H) x 2,048(V) |
| Frame rate | 22fps (Mono 8bit) |
| Pixel size | 3.45μm x 3.45μm |
| Scanning area | 8.45mm(H) x 7.07mm(V) |
| Image size | 2/3 type |
| Aspect ratio | 6:5 |
| Scanning | Progressive |
| Electronic shutter method | Global shutter |
| Random Trigger Shutter Type | External Trigger / Software Trigger |
| Random Trigger Shutter Mode | Edge / Level / Bulk (255 times) |
| Sequential Shutter | 16 entries (max) |
| Exposure Time | MANUAL : 1.08μs to 14.44μs (Short exposure mode ON), 32μs to 16s (Short exposure mode OFF) AE : 32μs ~ 1s Random Trigger Shutter : 32μs to 16s (Edge or Bulk mode), 200μs to Trigger width (Level mode) |
| Synchronization System | Internal |
| Optical glass/filter | Dust-proof glass |
| Sensitivity | 2,600 lx (F11, 1/22s) |
| Minimum illuminance | 2 lx (F1.4, Gain: +24dB, Video level: 50%) |
| Gain | MANUAL : 0 to +24dB, AGC : 0 to +24dB |
| Black Level | -25% to +25% |
| Gamma / LUT | γ=1.0 to 0.45 / In 12bit, Out 12bit |
| Image Buffer | 64M Byte |
| Image Output Format | Mono 8bit / Mono 10bit / Mono 12bit |
| Readout Mode | All pixel, Scalable, Binning, Decimation, Mirroring, Flip |
| External trigger input | Low: 0 to 0.5V, High: 3.3 to 24.0V High active / Low active, Pulse width: 200μs (minimum) |
| Power supply | PoE / DC12V±10% |
| Power consumption | PoE: 3.1W max. / DC12V: 2.6W max. |
| Lens mount | C-mount |
| External dimension | 29(W) x 29(H) x 40(D) mm (Not including protruding parts) |
| Mass | approx. 60g |
| Operation temperature | 0°C to 40°C (below 60°C on cabinet surface) |
| Operation humidity | 10% to 90% (no condensation) |
| Conformity | CE, FCC, RoHS, WEEE, GigE Vision, GenICam, IIDC2 |
