Product Description
The PIXCI® EB1mini is EPIX’ smallest camera link frame grabber series. Applications include: Airborne, Automotive, Drone, Industrial, Mobile, Rugged and Underwater. Features of this series include: MDR or SDR connector options, line scan or area scan, camera frame rate sequence capture, triggered image sequence capture, camera integration, Async reset control, LVTTL trigger in and strobe out. Interface: PCI Express Mini Card; Full and Half Length versions; 64-bit memory addressing; Burst transfer at 250 megabytes per second; 200 megabyte per second sustained data transfer.
Four versions are offered in this series:
The PIXCI® EB1mini frame grabber provides a vertical Camera Link SDR connector with FPGA on a single printed circuit board using a full size mini card slot. At the maximum Camera Link clock rate of 85 MHz, cables up to 10 meters long can be used. Dimensions: Full mini circuit board: 50.95 x 30.0 mm (2.006 x 1.181 inches)
The PIXCI® EB1miniH has an SDR Camera Link connector and FPGA on a separate circuit board for mounting to the side of a small chassis. Two very flexible cables connect to a half-length mini card for the PCI express connection. This allows for more mounting options in space constrained embedded systems that have half-length mini PCIe slots or full length slots that have a half-length mounting standoff. At the maximum Camera Link clock rate of 85 MHz, cables up to 10 meters long can be used. Dimensions: FPGA circuit board: 66.04 x 30.0 mm (2.6 x 1.181 inches); Half mini circuit board: 26.8 x 30.0
The PIXCI® EB1miniG has the Camera Link connector on a separate circuit board and connects to the FPGA circuit board with two very flexible cables. This version requires less space on the panel for more mounting options in space constrained embedded systems with a full size mini card PCIe slot. It is available with an MDR or SDR Camera Link connector, and is shown here with an SDR. At the maximum Camera Link clock rate of 85 MHz, a maximum length of 7 meters can be used. Dimensions: Full mini circuit board: 50.95 x 30.0 mm (2.006 x 1.181 inches); Connector circuit board: 38.354 x 30.0 mm (1.51 x 1.181 inches); Cable length between circuit boards shown: 30.48 cm (12 inches)
The PIXCI® EB1miniF moves the Camera Link connector to a separate board and connects the two with detachable flat ribbon cable. This allows for more mounting options in space constrained embedded systems with a full size mini card PCIe slot. Available with an MDR or SDR Camera Link connector, shown here with MDR. At the maximum Camera Link clock rate of 85 MHz, cable with maximum length of 7 meters can be used. Dimensions: Full mini circuit board: 50.95 x 30.0 mm (2.006 x 1.181 inches); Connector circuit board: 38.354 x 30.0 mm (1.51 x 1.181 inches); Cable length between circuit boards shown: 20.32 cm (8 inches)
