• For two independent Camera Link Base configuration cameras or one Camera Link Base, Medium, Full, 72-bit or 80-bit camera
• Directly compatible with hundreds of Camera Link cameras available on the market
• PoCL, Power over Camera Link
• ECCO: Extended Camera Link cable length
• PCIe Gen 2 x4 bus
• Feature-rich set of 20 digital IO lines
• Compatible with eGrabber driver and Memento Event Logging Tool

Benefits

Compatible with eGrabber

• eGrabber Studio: eGrabber's new interactive evaluation and demonstration application

• GenICam Browser: An application giving access to the GenICam features exposed by the GenTL Producer(s)

• GenTL Console: A command-line tool giving access to the functions and commands exposed by the Euresys GenTL Producer

ECCO: Extended Camera Link Cable Operation

• Use longer, up to 15 meters long, Camera Link cables!

Directly compatible with hundreds of Camera Link cameras available on the market

Check out our supported cameras page (in the Support menu)

High-performance DMA (Direct Memory Access)

• Direct transfer into user-allocated memory and hardware boards that expose PCI addresses

• Hardware scatter-gather support • 64-bit addressing capability

Area-scan triggering capabilities

• A trigger is used to start the acquisition when the part is in position. Hardware triggers come from the Grablink's I/O lines. Software triggers come from the application.

• An optional trigger delay is available to postpone the acquisition for a programmable time.

• A trigger decimation function allows to skip some of the triggers. DATASHEET Grablink Duo Frame grabber for one full- or two base-configuration Camera Link cameras 

• Camera exposure control allows the application to control the exposure time of the camera.

• When the acquisition starts, at the appropriate timing, the Grablink board generates a signal to control an illumination device connected to one of its output lines